Park/Turn Signal Lamp: Installation

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Headlamp Electrical Connectors

Courtesy of DAIMLERCHRYSLER CORP.

Press the bulb into socket.
Position the bulb socket (5) into headlamp unit (5).
Rotate the turn signal bulb socket (4) 1/4 turn clockwise.

Fig 2: Removing/Installing Headlamp
Courtesy of DAIMLERCHRYSLER CORP.
Install the headlamp unit (1) (Refer to ELECTRICAL/LAMPS/LIGHTING - EXTERIOR/HEADLAMP UNIT - INSTALLATION) .
Connect the battery negative cable.