LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 591 (Lighting Systems - Exterior (Service Information)) >> Headlamp >> Installation

Section 591 (Lighting Systems - Exterior (Service Information)): Headlamp: Installation

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Headlamp Electrical Connectors
GC0029234Courtesy of DAIMLERCHRYSLER CORP.
CAUTION: Do not touch the bulb glass with fingers or other oily surfaces. Reduced bulb life will result.
  1. Position the high or low beam lamp (1 or 2) into the head lamp unit (5).
  2. Position the lamp (1 or 2) in headlamp unit (5) and turn the lamp one quarter turn clockwise.
  3. Connect the lamp (1 or 2) electrical connector.
    Fig 2: Removing/Installing Headlamp
    GC0029235Courtesy of DAIMLERCHRYSLER CORP.
  4. Install the headlamp unit (Refer to ELECTRICAL/LAMPS/LIGHTING - EXTERIOR/HEADLAMP UNIT - INSTALLATION) .