LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 590 (Frame & Bumpers) >> Hook-Rear Tow >> Installation >> Rear Tow Hook

Rear Tow Hook

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Tow Hook
GC0027819Courtesy of DAIMLERCHRYSLER CORP.
  1. Install the tow hook (5) and install the nuts (2).
  2. Tighten the nuts (2) to 88 N.m (65 ft. lbs.).
  3. Tighten the brace bolt (3) to 88 N.m (65 ft. lbs.).
  4. Install the rear fascia. (Refer to FRAME & BUMPERS/BUMPERS/FASCIA-REAR - INSTALLATION)