Section 590 (Frame & Bumpers): Hitch-Trailer: Installation

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Hitch

Courtesy of DAIMLERCHRYSLER CORP.

Install the hitch (2) onto the rear body cradle (1) and install the bolts (3).
Tighten the bolts (3) to 156 N.m (115 ft. lbs.).

Fig 2: Trailer Wiring
Courtesy of DAIMLERCHRYSLER CORP.
Connect the trailer connector wire harness (1).
NOTE: 7-way connector shown, 4 way similar.
Install the rear fascia. (Refer to FRAME & BUMPERS/BUMPERS/FASCIA-REAR - INSTALLATION)