LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 590 (Frame & Bumpers) >> Bracket-Front Fascia Mounting >> Removal

Bracket-Front Fascia Mounting: Removal

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Bracket Assembly
GC0027777Courtesy of DAIMLERCHRYSLER CORP.
  1. Remove the fascia. (Refer to FRAME & BUMPERS/BUMPERS/FRONT FASCIA - REMOVAL) 
  2. Remove the bolts (3).
  3. Remove the push pin fasteners and remove the fascia mounting bracket (1).
scientia non olet · About LEMON Manuals