Quarter Glass: Removal
WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Before proceeding with the following repair procedure, review all warnings and cautions (Refer to BODY/STATIONARY GLASS - WARNING) .
- Remove the quarter panel trim from the side of the vehicle being serviced (Refer to REMOVAL ).
- Carefully pull down the headliner to access the upper mounting studs that secure the quarter glass (1) to the window fence (2) and, remove the nuts from the studs.
- Remove the nuts that secure the lower mounting studs to the window fence and, remove the nuts from the studs.
- Using razor knife, cut butyl sealer between the mounting studs that secure the quarter glass to window fence.
- Carefully push the quarter window glass from the opening.