Section 540 (Body - Interior & Exterior): Liftgate: Latch: Removal
WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
- Open the liftgate.
- Disconnect and isolate the battery negative cable.
- Remove the lower trim panel from the inside of the liftgate (1). (Refer to BODY/DECKLID/HATCH/LIFTGATE/TAILGATE/TRIM PANEL - REMOVAL) .
- Disconnect the electrical connectors of the latch (2).
- Remove the three screws (2) that secure the latch (1) to the liftgate.
- Remove the liftgate latch (1) from the vehicle.