LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 540 (Body - Interior & Exterior) >> Liftgate >> Latch-Liftgate Glass >> Installation

Latch-Liftgate Glass: Installation

WARNING: This page is about a different car, the 2005 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: LATCH
GC0027948Courtesy of DAIMLERCHRYSLER CORP.
  1. Position the latch (3) into the inside of the liftgate.
  2. Install and tighten the three bolts (2). Tighten the bolts to 12 N.m (9 ft. lbs.).
  3. Connect electrical connectors (1) to the latch (3).
  4. Install the trim panel onto the inside of the liftgate (Refer to BODY/DECKLID/HATCH/LIFTGATE/TAILGATE/TRIM PANEL - INSTALLATION) .
  5. Reconnect the battery negative cable.
  6. Close the liftgate.
scientia non olet · About LEMON Manuals