Rear Fascia Support: Removal

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Rear Fascia Support Brackets

Courtesy of DAIMLERCHRYSLER CORP.

1 - SWING GATE OPENING

2 - FASCIA SUPPORTS

RIVETS (4)

Remove the rear fascia assembly. (Refer to FRAME & BUMPERS/BUMPERS/REAR FASCIA - REMOVAL)

Remove the four rivets and remove the two fascia supports. See Fig 1.

Fig 2: Rear Fascia Support Crossmember

Courtesy of DAIMLERCHRYSLER CORP.

1 - SWING GATE OPENING

2 - FASCIA SUPPORT

3 - BOLTS (7)

For export models, remove the seven bolts and remove the fascia support. See Fig 2.