LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 508 (Frames & Bumpers) >> Front Tow Hook >> Installation

Front Tow Hook: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the stud plate if previously removed.
  2. Install the tow eye/hook.
  3. Install the nuts and bolt and tighten to 61 N.m (45 ft. lbs.).
  4. Install the front fascia if the stud plate was replaced. (Refer to FRAME & BUMPERS/BUMPERS/FRONT FASCIA - INSTALLATION) 
scientia non olet · About LEMON Manuals