LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Body - Interior & Exterior) >> Weatherstrip/Seals >> Swing Gate BELTLINE Weatherstrip >> Removal

Swing Gate BELTLINE Weatherstrip: Removal

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the swing gate trim panel. (Refer to BODY/SWING GATE/TRIM PANEL - REMOVAL) .
  2. Pull seal away from the corner tabs and remove from the swing gate flange.
scientia non olet · About LEMON Manuals