LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Body - Interior & Exterior) >> Weatherstrip/Seals >> Side Rail Weatherstrip/Retainer >> Installation

Side Rail Weatherstrip/Retainer: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the weatherstrip and seat the push in fasteners.
  2. Install the two screws.
  3. Install the windshield weatherstrip. (Refer to BODY/WEATHERSTRIP/SEALS/WINDSHIELD A-PILLAR WEATHERSTRIP/RETAINER - INSTALLATION) .
scientia non olet · About LEMON Manuals