LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 504 (Body - Interior & Exterior) >> Weatherstrip/Seals >> Windshield A-Pillar Weatherstrip/Retainer >> Installation

Windshield A-Pillar Weatherstrip/Retainer: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the weatherstrip and install the seven screws.
  2. Position the a-pillar seal over the windshield/a-pillar and the side rail weatherstrip flanges and seat fully.
scientia non olet · About LEMON Manuals