Drive Motor: Removal
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
- Remove headliner. (Refer to BODY/INTERIOR/HEADLINER - REMOVAL) .
- Disconnect the electrical connector. See Fig 1.
- Remove three motor assembly attaching screws from bottom side of motor assembly and remove motor assembly from the motor bracket.
| 1 - ELECTRICAL CONNECTOR |
| 2 - MODULE ASSEMBLY |
| 3 - DRIVE MOTOR |
| 4 - MOUNTING SCREWS |