Stationary Glass: Windshield: Removal
WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
- Remove inside rear view mirror. (Refer to BODY/INTERIOR/REAR VIEW MIRROR - REMOVAL) .
- Remove cowl cover. (Refer to BODY/EXTERIOR/COWL GRILLE - REMOVAL) .
- Remove screws attaching windshield side molding to A-pillar.
- Cut urethane bonding from around windshield using a suitable sharp cold knife. A pneumatic cutting device can be used if available.
- Separate windshield from vehicle.