LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 500 (2.4L Engine (Service Information)) >> Timing Belt Cover(S) >> Installation >> Front Cover

Front Cover

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install timing belt front covers. Tighten fasteners to 7 N.m (60 in. lbs.).
  2. Install generator drive belt tensioner. (Refer to COOLING/ACCESSORY DRIVE/BELT TENSIONERS - INSTALLATION)
  3. Install crankshaft vibration damper. (Refer to ENGINE/ENGINE BLOCK/VIBRATION DAMPER - INSTALLATION) 
scientia non olet · About LEMON Manuals