LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 497 (HVAC Systems) >> Distribution >> Floor Distribution Duct >> Installation

Floor Distribution Duct: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the floor distribution duct onto the bottom of the HVAC housing.
  2. Install the three screws that secure the floor distribution duct to the HVAC housing. Tighten the screws to 2 N.m (17 in. lbs.).
  3. Install the rear floor heat duct (Refer to HEATING & AIR CONDITIONING/DISTRIBUTION/REAR FLOOR HEAT DUCT - INSTALLATION) .
  4. Install the instrument panel (Refer to INSTRUMENT CLUSTER - INSTALLATION).
scientia non olet · About LEMON Manuals