LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 2005 >> Wrangler Rubicon, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 497 (HVAC Systems) >> Distribution >> Rear Floor Heat Duct >> Installation

Rear Floor Heat Duct: Installation

WARNING: This page is about a different car, the 2005 Jeep Liberty. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the rear floor heat duct into the vehicle.
  2. Connect the rear floor heat duct to the floor distribution duct.
  3. Install the screw that secures the rear floor heat duct to the floor console bracket. Tighten the screw to 2 N.m (17 in. lbs.).
  4. Install the floor console (Refer to BODY/INTERIOR/FLOOR CONSOLE - INSTALLATION) .
scientia non olet · About LEMON Manuals