Test NTC-9A - Checking Solenoid Operations
WARNING: This page is about a different car, the 1994 Plymouth Sundance, 1994 Plymouth Acclaim, 1994 Dodge Spirit, 1994 Dodge Shadow, and 1994 Chrysler LeBaron. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
For circuit and connector terminal identification, see CONNECTOR IDENTIFICATION DIRECTORY
. For wiring diagrams, see WIRING DIAGRAMS
.
- Using DRB, actuate evaporative purge solenoid. While touching top of evaporative purge solenoid, feel for operation. If evaporative purge solenoid does not operate, replace evaporative purge solenoid. Perform TEST VER-2 .
- If evaporative purge solenoid operates and vehicle is not equipped with an EGR valve, evaporative purge solenoid is operating normally. Test is complete. If evaporative purge solenoid operates and vehicle is equipped with an EGR valve, actuate EGR solenoid.
- While touching top of EGR solenoid, feel for operation. If EGR solenoid does not operate, replace EGR solenoid. Perform TEST VER-2. If EGR solenoid operates, test is complete.