Test 3A - Verification Test

WARNING: This page is about a different car, the 1995 Jeep Grand Cherokee. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Perform TEST 1A before proceeding with this test. For connector terminal identification, see CONNECTOR IDENTIFICATION . For wiring diagram, see WIRING DIAGRAM .

Turn ignition off, then turn ignition on. Reconnect any disconnected components or connectors. Ensure TCM is correctly mounted. Check transmission fluid level with shift lever in "N" position and transmission at normal operating temperature. Adjust as needed. Repeat TEST 1A .