Valve Lifters R & I: Installation
WARNING: This page is about a different car, the 1995 Jeep Grand Cherokee, 1995 Dodge Ram Wagon, 1995 Dodge Ram Van, 1995 Dodge Pickup, and 1995 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
- Lubricate valve lifters and push rods before installing in original locations. Ensure valve lifter is installed so oil feed hole in side of valve lifter is facing upward, away from crankshaft.
- Align the yokes with arrow pointing toward camshaft. Install yoke retainer and tighten bolts to specification. Refer to TORQUE SPECIFICATIONS .
CAUTION:
DO NOT allow engine RPM to exceed fast idle until valve lifters have filled with oil and become quiet.