LEMON Manuals: Even more car manuals for everyone
Home >> Jeep >> 1996 >> Grand Cherokee Limited, 5.2 Y >> Repair and Diagnosis >> External Pages >> Different car >> Section 178 (5.2L V8 Gas - VIN [Y]) >> Torque Specifications

Torque Specifications

WARNING: This page is about a different car, the 1995 Jeep Grand Cherokee, 1995 Dodge Ram Wagon, 1995 Dodge Ram Van, 1995 Dodge Pickup, and 1995 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS

Application Ft. Lbs. (N.m)
Axle Bracket-To-Bellhousing Bolt (Dakota 4WD) 65 (88)
Axle Shaft Nut (Dakota 4WD) 180 (244)
Axle Shaft-To-Differential Flange Bolt (Dakota 4WD) 66 (90)
Axle-To-Insulator Bolt (Dakota 4WD) 75 (102)
Camshaft Sprocket Bolt 50 (68)
Camshaft Thrust Plate Bolt 18 (24)
Clutch Housing-To-Cylinder Block Bolt
Dakota & Ram Van/Wagon
(1) 20-40 (27-54)
(2) 35-65 (47-88)
All Others 40 (54)
Connecting Rod Bolt 45 (61)
Crankshaft Pulley Bolt 18 (24)
Cylinder Head Bolt (3)
Step 1 50 (68)
Step 2 105 (143)
Step 3 (Verify Torque) 105 (143)
Differential Pinion Nose Bracket-To-Adapter Bolt (Dakota 4WD) 65 (88)
Differential Pinion Nose Bracket-To-Bellhousing Bolt (Dakota 4WD) 65 (88)
Engine Mount Bracket-To-Frame Rail Bolt (Dakota 2WD) 30 (41)
Engine Mount Through-Bolt
Dakota 2WD 50 (68)
Dakota 4WD 75 (102)
Engine Mount-To-Cylinder Block Bolt (Dakota) 30 (41)
Engine Mount-To-Frame Bracket Bolt/Nut
Ram Pickup 75 (102)
Ram Van/Wagon 65 (88)
Exhaust Manifold Bolt & Nut 25 (34)
Flexplate-To-Converter Bolts
9.5" 3-Lug Converter (0.46" Bolt) 40 (54)
9.5" 4-Lug Converter (0.52" Bolt) 55 (75)
10" 4-Lug Converter (0.52" Bolt) 55 (75)
10.75" 4-Lug Converter (0.44" Bolt) 23 (31)
Flexplate-To-Crankshaft Bolt 55 (75)
Flywheel-To-Crankshaft Bolt 105 (142)
Front Cover Bolt 30 (41)
Main Bearing Cap Bolt 85 (115)
Oil Drain Plug 25 (34)
Oil Filter Adapter Stud 50 (68)
Oil Pan Bolt 18 (24)
Oil Pump Bolt 30 (41)
Rocker Arm Bolt 21 (28)
Shift Motor Bolt (Dakota 4WD) 65 (88)
Spark Plug 30 (41)
Transfer Case Yolk Bolt (Dakota 4WD) 20 (27)
Vibration Damper Bolt 135 (183)
Water Pump Bolt 30 (41)
Wheel Lug Nut
1/2" 85-105 (115-142)
5/8" 177-225 (240-305)
INCH Lbs. (N.m) 
Intake Manifold Bolt
Step 1 (Bolts No. 1 & 4 To) (4) 72 (8)
Step 2 (Bolts 5 Through 12 To) 72 (8)
Step 3 (Verify Torque) 72 (8)
Step 4 (Torque All Bolts) 144 (16)
Step 5 (Verify Torque) 144 (16)
Intake Manifold Plenum Pan Bolt
Step 1 27 (3)
Step 2 44 (5)
Step 3 89 (10)
Step 4 (Verify Torque) 89 (10)
Oil Pump Cover Bolt 97 (11)
Valve Cover Bolts 97 (11)
(1) Bolts through clutch housing into cylinder block.
(2) Bolts through cylinder block into clutch housing.
(3) Tighten bolts in sequence. See Figure.
(4) Tighten bolts in alternating steps of 12 INCH lbs. (1.4 N.m) to 71 INCH lbs. (8 N.m). See Figure.