Front Cover R & I: Installation
WARNING: This page is about a different car, the 1995 Jeep Grand Cherokee, 1995 Dodge Ram Wagon, 1995 Dodge Ram Van, 1995 Dodge Pickup, and 1995 Dodge Dakota. However, it is still accessible from the selected car via links, so may be relevant.
- Ensure sealing surfaces are clean. Apply a 1/8" (3.17 mm) bead of RTV sealant to oil pan gasket. Install gasket, front cover and bolts. DO NOT tighten bolts at this time.
- Install front cover oil seal. See FRONT COVER OIL SEAL . Tighten front cover, oil pan and then vibration damper bolts to specification. See TORQUE SPECIFICATIONS . To complete installation, reverse removal procedure.