Possible Causes
WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- Purpose of the DTC
- To monitor for over pressure (fast)
- Electrical Cause
- No
- Mechanical Cause
- Yes
- Control Module Signal Name
- Not applicable
- Monitor Description
- If modeled pressure rises above 10 bar, system is purged and pressure is made again. If this happens 5 times during driving cycle error is set
- Prioritized List of Possible Causes
- The powertrain control module has determined failures where some circuit quantity, reported through serial data, is above a specified range
- Diesel exhaust fluid line frozen/blocked
- Diesel exhaust fluid line heater frozen
- Diesel exhaust fluid injector frozen/blocked
- Diesel exhaust fluid tank module frozen