LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 89 (Wiring Harnesses -- XE (X760)) >> Wiring Harnesses >> Description And Operation >> Electrical Wiring Harness Repair >> Wiring Harness Repair Tools >> Extraction Tools

Extraction Tools

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

The extraction tools are used to remove a terminal from an electrical connector. Refer to the Wire Chart and Service Repair Information  for the correct extraction tool for each terminal (where applicable). Each extraction tool has been specially designed to extract a particular type of electrical connector terminal. The use of any other tool is not recommended and is liable to cause damage to the electrical connector.

CAUTION: Inspect the electrical connector housing for evidence of damage which may affect the security of a terminal inside the connector housing, the operation of the anti-backout device and the secure fitment of the connector housing to the intended component/connector housing. Replace a damaged electrical connector housing.
scientia non olet · About LEMON Manuals