LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2020 >> XF Checkered Flag >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Interior Lighting -- XE (X760)) >> Interior Lighting >> Diagnosis And Testing >> Pinpoint Tests >> Pinpoint Test A: Interior Lamp Function Tests

Pinpoint Test A: Interior Lamp Function Tests

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
  1. A1: INTERIOR LAMP FUNCTION TEST 1 
    1. Lock the vehicle
    2. Unlock the vehicle using the smart key unlock switch
    3. Visually check the front and rear interior lamps

    Are any of the interior lamps illuminated?

    • Yes  : Test passed. GO to A2.
    • No  : Test failed. GO to Pinpoint Test B .
  2. A2: INTERIOR LAMP FUNCTION TEST 2 
    1. Visually check the front and rear interior lamps

    Is the front interior lamp illuminated?

    • Yes  : Test passed. GO to A3.
    • No  : Test failed. GO to Pinpoint Test E .
  3. A3: INTERIOR LAMP FUNCTION TEST 3 
    1. Visually check the front and rear interior lamps

    Is the rear left interior lamp illuminated?

    • Yes  : Test passed. GO to A4.
    • No  : Test failed. GO to Pinpoint Test F .
  4. A4: INTERIOR LAMP FUNCTION TEST 4 
    1. Visually check the front and rear interior lamps

    Is the rear right interior lamp illuminated?

    • Yes  : Test passed. GO to A5.
    • No  : Test failed. GO to Pinpoint Test G .
  5. A5: INTERIOR LAMP FUNCTION TEST 5 

    The interior lamps should extinguish 20 seconds after the vehicle was unlocked if a door was not opened.

    1. Wait for the interior lamps to extinguish
    2. Visually check the front and rear interior lamps

    Have the front and rear interior lamps extinguished?

    • Yes  : Test passed. GO to A6.
    • No  : Test failed. Check the instrument cluster for a message indicating that a door is open when it is closed
  6. A6: INTERIOR LAMP FUNCTION TEST 6 
    NOTE: The vehicle will lock 30 seconds after it was unlocked if a door was not opened. If this has occurred, unlock the vehicle using the smart key unlock switch and wait until the interior lamps extinguish before continuing.
    1. Open a door
    2. Visually check the front and rear interior lamps

    Are the front and rear interior lamps illuminated?

    • Yes  : Test passed. GO to A7.
    • No  : Test failed. Check the instrument cluster for an absence of door open message when a door is open
  7. A7: INTERIOR LAMP FUNCTION TEST 7 
    NOTE: Steps 2 to 4 should be completed within 20 seconds.
    1. Enter the vehicle
    2. Close the door
    3. Start the engine
    4. Visually check the front and rear interior lamps

    Have the front and rear interior lamps extinguished?

    • Yes  : Test passed. GO to A8.
    • No  : Test failed. Using the manufacturer approved diagnostic system, check the body control module for related DTCs and refer to the relevant DTC index
  8. A8: INTERIOR LAMP FUNCTION TEST 8 
    1. Briefly touch the front interior lamp lens
    2. Visually check the front and rear interior lamps

    Are the front and rear interior lamps illuminated?

    • Yes  : Test passed. GO to A9.
    • No  : Test failed. GO to Pinpoint Test D .
  9. A9: INTERIOR LAMP FUNCTION TEST 9 
    1. Briefly touch the front interior lamp lens
    2. Visually check the front and rear interior lamps

    Have the front and rear interior lamps extinguished?

    • Yes  : Test passed. GO to A10.
    • No  : Test failed. GO to Pinpoint Test D .
  10. A10: INTERIOR LAMP FUNCTION TEST 10 
    1. Stop the engine
    2. Visually check the front and rear interior lamps

    Are the front and rear interior lamps illuminated?

    • Yes  : Test passed. GO to A11.
    • No 

      Test failed. Using the manufacturer approved diagnostic system, check the body control module for related DTCs and refer to the relevant DTC index

  11. A11: INTERIOR LAMP FUNCTION TEST 11 
    1. Exit the vehicle
    2. Close the door
    3. Lock the vehicle
    4. Visually check the front and rear interior lamps

    Have the front and rear interior lamps extinguished?

    • Yes  : Tests complete
    • No  : Test failed. Using the manufacturer approved diagnostic system, check the body control module for related DTCs and refer to the relevant DTC index

    NOTE: 

scientia non olet · About LEMON Manuals