Pinpoint Test B: Auto Mode Function Tests

WARNING: This page is about a different car, the 2018 Jaguar XE and 2017 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.

B1: AUTO MODE FUNCTION TEST 1
Interior lamps auto mode off is also known as Hunting mode.
1. Set the ignition to on
2. Touch the front interior lamp lens for 5 seconds (or until the interior lamp flashes)
3. Check the touch screen for a message
Was "Auto function on" displayed on the touch screen?
- Yes : Test passed. GO to B2.
- No : Test failed. GO to B3.
B2: AUTO MODE FUNCTION TEST 2
1. Open a door
2. Close the door
3. Visually check the front and rear interior lamps
Are the front and rear interior lamps illuminated?
- Yes : Tests complete
- No : Test failed. GO to Pinpoint Test C .
B3: AUTO MODE FUNCTION TEST 3
1. Touch the front interior lamp lens for 5 seconds (or until the interior lamp flashes)
2. Check the touch screen for a message
Was "Auto function on" displayed on the touch screen?
- Yes : Auto mode now set to on. GO to Pinpoint Test C .
- No : Test failed. GO to Pinpoint Test D .
  NOTE: Interior lamp operation is inhibited if the battery state of charge is below threshold