DTC P0833-24: Clutch Pedal Switch "B" Circuit - Signal stuck high: Action
WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to the electrical circuit diagrams and check the clutch pedal position sensor circuit for short circuit to power
- Inspect connectors for signs of water ingress, and pins for damage and/or corrosion
- Install a new clutch pedal position sensor, only when diagnosed as failed
- Using the Jaguar Land Rover approved diagnostic equipment, clear the Diagnostic Trouble Code(s) and retest