DTC P064C-96: Glow Plug Control Module 1 - Component internal failure: Action
WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to the electrical circuit diagrams and check the LIN_B circuit or glow plug control module circuit for short circuit to ground, short circuit to power, open circuit, high resistance
- Inspect connectors for signs of water ingress and pins for damage and/or corrosion
- Install a new glow plug control module, only when diagnosed as failed
- Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest