DTC P0627-13: Fuel Pump "A" Control Circuit/Open - Circuit open: Action
WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Refer to PINPOINT TESTS
to perform pinpoint tests
- Check the fuel level, add fuel if required
- Refer to the electrical circuit diagrams and check the fuel pump - Low pressure output command from powertrain control module to body control module circuit for open circuit, high resistance
- Inspect connectors for signs of water ingress and pins for damage and/or corrosion
- Using the Jaguar Land Rover approved diagnostic equipment, clear the DTCs and retest