Differential - V6 S/C 3.0L Petrol/V8 S/C 5.0L Petrol (G1895877): Installation
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
-
NOTE: Clean all the mating faces and reusable parts thoroughly and check for damage.
Install a new O-ring seal.
Renew Part: Front differential case to engine oil pan O-ring seal Quantity: 1.
-
NOTE: Make sure that the breather is not blocked or contaminated.
Install the breather.
-
- Install the front differential.
- Install the 4 bolts.
Torque : 115Nm
- Install the front subframe.
Refer to: FRONT SUBFRAME - V6 S/C 3.0L PETROL
Refer to: FRONT SUBFRAME - PROJECT 8
- Install the front driveshaft.
Refer to: FRONT DRIVESHAFT - PROJECT 8
- Fill the front differential.
Refer to: DIFFERENTIAL DRAINING AND FILLING