Differential - INGENIUM I4 2.0L Diesel/INGENIUM I4 2.0L Petrol (G1913603): Removal
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- Some variation in the illustrations may occur, but the essential information is always correct.
- Some components shown removed for clarity.
- Removal steps in this procedure may contain installation details.
-
WARNING: Make sure to support the vehicle with axle stands.
Raise and support the vehicle.
- Refer to: DIFFERENTIAL DRAINING AND FILLING
- Refer to: FRONT SUBFRAME - INGENIUM I4 2.0L DIESEL
- Refer to: FRONT DRIVESHAFT
-
CAUTION: Do not carry out this step if a new differential is to be installed.
Remove and discard the O-ring seal.