Differential - INGENIUM I4 2.0L Diesel/INGENIUM I4 2.0L Petrol (G1913603): Installation
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- Clean all the mating faces and reusable parts thoroughly and check for damage.
-
NOTE: This step is only required if previously removed.
Install a new O-ring seal.
Renew Part: Halfshaft seal Quantity: 1.
Torque : 115Nm
- Refer to: FRONT SUBFRAME - INGENIUM I4 2.0L DIESEL
- Refer to: FRONT DRIVESHAFT
- Refer to: DIFFERENTIAL DRAINING AND FILLING