SEATBELT System (G1818070): Overview
A three point seatbelt is installed for each seat. A pretensioner is incorporated into the retractor of each seatbelt.
The pretensioners is a Supplementary Restraint System (SRS) pyrotechnic device which is controlled by the RCM in the The tension sensor is part of the occupant classification system in the SRS . For additional information, Refer to: AIRBAG SUPPLEMENTARY RESTRAINT SYSTEM
The center rear safety belt features a mini-buckle lower anchorage. The mini-buckle is disengaged by inserting a suitable tool into the small aperture on the front face of the housing.
To aid the installation of child seats, 3 tethers are located on the rear parcel shelf.
A seatbelt reminder and a beltminder system warn the driver if the seatbelt of an occupied front seat is not fastened, or if a seatbelt is unfastened during the journey.