LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2019 >> XF S >> Repair and Diagnosis >> External Pages >> Different car >> Section 230 (Exhaust System - INGENIUM I4 2.0L Diesel -- XE/(760)) >> Exhaust System - INGENIUM I4 2.0L Diesel (G1817300) >> Removal And Installation >> NVH Damper - VIN Range: Ja900000/LCP66051 (G2703193) >> Removal

NVH Damper - VIN Range: Ja900000/LCP66051 (G2703193): Removal

WARNING: This page is about a different car, the 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Observe due care when working near a hot exhaust system.
NOTE:
  • This procedure contains some variation in the illustrations depending on the vehicle specification, but the essential information is always correct.
  • This procedure contains illustrations showing certain components removed to provide extra clarity.
  1. Raise and support the vehicle on a suitable 2 post lift.

    Refer to: LIFTING

  2. G13913166Courtesy of JAGUAR LAND ROVER NORTH AMERICA, LLC

    Remove and discard the exhaust Noise, Vibration and Harshness (NVH) mass damper and bolt.