Symptom Chart
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
| SYMPTOM |
POSSIBLE CAUSES |
ACTION |
| Malfunction indicator lamp illuminated and/or warning message: TRANSMISSION FAULT |
- Engine system fault
- Transmission control switch fault
- Transmission system fault
|
- Using the Jaguar Land Rover approved diagnostic equipment, check the powertrain control module for related DTC
s and refer to the relevant DTC
index
- Using the Jaguar Land Rover approved diagnostic equipment, check the transmission control switch for related DTC
s and refer to the relevant DTC
index
- Using the Jaguar Land Rover approved diagnostic equipment, check the transmission control module for related DTC
s and refer to the relevant DTC
index
|
| Gear shifts harsh |
- Engine system fault
- Transmission system fault
|
- Using the Jaguar Land Rover approved diagnostic equipment, check the powertrain control module for related DTC
s and refer to the relevant DTC
index
- Using the Jaguar Land Rover approved diagnostic equipment, check the transmission control module for related DTC
s and refer to the relevant DTC
index
|
- Hesitation when engaging a gear
- Harsh gear change after initially pulling away from a stationary position
- Harsh gear changes when driving
|
- Powertrain Control Module (PCM) Transmission Control Module (TCM) calibration updates required
|
- If a customer experiences any of the symptoms, update the Powertrain Control Module (PCM) and Transmission Control Module (TCM) software. Refer to HESITATION/HARSH GEAR CHANGE
|