Instrument Panel Wiring Harness (G1862932): Notes
WARNING: This page is about a different car, the 2020 Jaguar XE and 2019 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
| 86.70.10 | INSTRUMENT PANEL WIRING HARNESS -RENEW | ALL DERIVATIVES | 9.40 |
CAUTION:
- Make sure that the wiring harness is not twisted or damaged on removal. Failure to follow this instruction may result in damage to the vehicle.
- Take extra care not to damage the wiring harness clips.
- Note the position of the wiring harnesses clips to aid installation.
- Removal steps in this procedure contains installation details.
NOTE:
Some variation in the illustrations may occur, but the essential information is always correct.
- Refer to: AIRBAG SUPPLEMENTARY RESTRAINT SYSTEM
- Refer to: STARTUP BATTERY DISCONNECT AND CONNECT
- Refer to: LUGGAGE COMPARTMENT LEFT TRIM PANEL
- Refer to: LUGGAGE COMPARTMENT RIGHT TRIM PANEL
-
NOTE: This procedure must be carried out on both sides.
Refer to: REAR SEAT BOLSTER
- Refer to: PARCEL SHELF
- Refer to: HEADLINER
-
NOTE:
- This procedure must be carried out on both sides.
- Right illustration shown, left is similar
- Refer to the appropriate service information
-
NOTE: This procedure must be carried out on both sides.
Refer to: SPECIFICATIONS