LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2018 >> F-Pace Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 205 (Diagnostic Trouble Code Index INGENIUM I4 2.0L Petrol, DTC: B10A2-31 To P060D-00 -- XE (X760)) >> Diagnostic Trouble Code Index INGENIUM I4 2.0L Petrol, DTC: B10A2-31 To P060D-00 >> Description And Operation >> Powertrain Control Module (Pcm) - INGENIUM 2.0L Petrol >> Notes

Powertrain Control Module (Pcm) - INGENIUM 2.0L Petrol: Notes

WARNING: This page is about a different car, the 2018 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Diagnosis by substitution from a donor vehicle is NOT  acceptable. Substitution of control modules does not guarantee confirmation of a fault, and may also cause additional faults in the vehicle being tested and/or the donor vehicle.
NOTE: If the control module or a component is suspect and the vehicle remains under manufacturer warranty, refer to the warranty policy and procedures manual, or determine if any prior approval programme is in operation, prior to the installation of a new module/component.

The table below lists all Diagnostic Trouble Codes (DTCs) that could be logged in the Powertrain Control Module. For additional diagnosis and testing information, refer to: INGENIUM 2.0L PETROL

scientia non olet · About LEMON Manuals