Possible Causes
WARNING: This page is about a different car, the 2018 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- Electrical Cause
- No
- Mechanical Cause
- No
- Control module cavity
- Not applicable
- Monitor Description
- To provide visibility of software traps and resets
- The engine control module internal reset monitor logs, reset and trap exceptions, which are triggered by defects in the normal software flow. For each software reset type the visibility in the fault event storage can be configured
- Connector is disconnected, connector pin is backed out, connector pin corrosion
- Engine control module failure