DTC P0106-23: Manifold Absolute Pressure/Barometric Pressure Sensor Circuit Range/Performance - Signal stuck low: Action
WARNING: This page is about a different car, the 2018 Jaguar XE. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to the electrical circuit diagrams and check the manifold absolute pressure and temperature sensor circuit for short circuit to ground, short circuit to power, open circuit, high resistance
- Inspect connectors for signs of water ingress, and pins for damage and/or corrosion
- Check and install a new manifold absolute pressure and temperature sensor as required
- Using the manufacturer approved diagnostic system, clear all stored DTCs and retest