LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2015 >> XFR-S >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Automatic Transmission/Transaxle - V6 S/C 3.0L Petrol AWD -- XF/X250) >> Automatic Transmission/Transaxle - V6 S/C 3.0L Petrol AWD >> Removal And Installation >> Input Shaft Seal (G1551379) >> Removal

Input Shaft Seal (G1551379): Removal

WARNING: This page is about a different car, the 2015 Jaguar XF, 2014 Jaguar XF, and 2013 Jaguar XF. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Some variation in the illustrations may occur, but the essential information is always correct.
  1. Refer to: Battery Disconnect and Connect (General Procedures).
  2. WARNING: Make sure to support the vehicle with axle stands.

    Raise and support the vehicle.

  3. Refer to: INSTALLATION .
  4. CAUTION: Be prepared to collect escaping fluids.
    G11417571

    Special Tool(s):  307-613

  5. CAUTION:
    • Discard the seal.
    • Take extra care to avoid damaging the seal register and running surface.
    • Take extra care not to damage the edges of the component.
G11417572

Special Tool(s):  100-012, 100-012-01, 308-375