Convertible Model Safety Precautions
Make sure the side windows one-touch/anti-trap function is calibrated before operating the convertible top (refer to 'PREPARATION - WINDOW ANTI-TRAP FEATURE ' for details of window calibration).
Care must be taken when gaining access into the convertible model. Avoid placing fingers, hands or items near the side and rear quarter windows, and the convertible top. The side and rear quarter windows are programmed to react automatically when either the door handle is pulled to access the vehicle, or when the convertible top is operated.
The side windows will immediately lower (sufficiently to clear the roof to window seal channel) as soon as a door handle is pulled, and will immediately raise to the fully closed position on door closing.
The rear quarter and side windows will immediately lower to the fully open position as soon as the convertible top is opening, and will immediately close as soon as the convertible top is closed.
The vehicle is delivered with a transportation cover installed to the convertible top.
The transportation cover MUST be removed before conducting a functional test of the convertible top. The convertible top is to be operated to open the carrier mechanism to the central position, with the tonneau panel still closed and latched. In this position, the transportation cover is able to be removed without damage to the convertible top.
Opening the convertible top fully with the transportation cover installed will cause damage to the convertible top and carrier mechanism.
Refer to 'STANDARD CHECKS: FUNCTIONAL - CONVERTIBLE TOP ' for further details.