Instrument Panel Lower Trim Panel: Installation
- Fit components to underscuttle.
- Fit and fully seat air conditioning aspirator vents to underscuttle.
- Fit and fully seat aspirator mounting bracket onto vent studs and fit and tighten bracket securing nuts.
- Fit stowage compartment lid and fit and tighten securing screws.
- Fit underscuttle to vehicle.
- Position underscuttle below fascia.
- Connect valet switch, and air conditioning aspirator harness multiplugs.
- Position underscuttle and seat upper fasteners.
- Position underscuttle on lower cross-member and fit and tighten the two securing screws.
- Connect battery earth lead and fit battery cover. Refer to BATTERY RECONNECTION PROCEDURE .