LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2002 >> XK8 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console >> Removal and installation >> Floor Console Finish Panel >> Installation

Floor Console Finish Panel: Installation

  1. Position veneer panel on console.
  2. Fit and fully seat oddments tray.
  3. On convertible model, connect roof switch harness multiplug.
  4. Route Sport mode and Cruise Control switches through panel aperture.
  5. Fully seat veneer panel on console.
  6. Position veneer panel clamp plates and fit and tighten securing screws.
  7. Position gear selector surround finisher.
  8. Fit and fully seat Sport mode and Cruise Control switches in finisher.
  9. Finally fit gear selector surround finisher.
  10. Move gear selector to position P.
  11. Connect ground cable to battery terminal and fit battery cover. Refer to BATTERY RECONNECTION PROCEDURE .
scientia non olet · About LEMON Manuals