LEMON Manuals: Even more car manuals for everyone
Home >> Jaguar >> 2002 >> XK8 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console >> Removal and installation >> Audio Unit Housing >> Installation

Audio Unit Housing: Installation

  1. Connect aerial co-axial lead to radio and stow excess harness and lead lengths in radio mounting aperture.
  2. Fully seat radio in console, ensuring that harnesses and leads do not obstruct.
  3. Position and locate switch module in console.
  4. Position the air conditioning control module in the console and fit and tighten the three securing screws.
  5. Fit radio retaining plate on the console.
  6. Holding radio console in position, route radio harness multiplugs into center console.
  7. Connect radio harness and radio console harness multiplugs.
  8. Route earth and aerial leads through radio console.
  9. Finally position radio console and fit and tighten the six securing screws.
  10. Fit earth lead to the radio stud and fit and tighten securing nut.
  11. Connect aerial lead to radio.
  12. Ensuring harness and leads do not obstruct, push radio fully home.
  13. Fit center console. Refer to FLOOR CONSOLE   .
  14. Fit 'J' gate surround. Refer to SELECTOR LEVER GATE FINISH PANEL .
  15. Connect earth cable to battery terminal and fit battery cover. Refer to BATTERY RECONNECTION PROCEDURE .
scientia non olet · About LEMON Manuals