LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 9 (Instrument Panel System Displays And Gauges) >> Repair Instructions >> Instrument Cluster Replacement

Instrument Cluster Replacement

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Instrument Panel Cluster (IPC)
GM1615040Courtesy of GENERAL MOTORS CORP.
Instrument Cluster Replacement

Callout Component Name
NOTE: Refer to Fastener Notice .
Fastener Tightening Specifications:  Refer to CELL LINK  .

Preliminary Procedure

  1. Remove the instrument panel cluster trim bezel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement .
  2. Remove the instrument panel upper trim pad. Refer to Instrument Panel Upper Trim Pad Replacement .
  3. Refer to Control Module References for replacement and setup information.
1 Screw, Instrument Panel Cluster Assembly (Qty: 4)

Tighten:  2 N.m (18 lb in)
2 Cluster Assembly, Instrument Panel
Tip:  Disconnect the electrical connector.
3 Screw, Instrument Panel Cluster Assembly (Qty: 2)

Tighten:  2 N.m (18 lb in)
4 Bracket, Instrument Panel Cluster
scientia non olet · About LEMON Manuals