Instrument Panel Cluster Trim Plate Bezel Replacement

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Trim Plate Bezel - Instrument Panel (I/P) Cluster

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice . Fastener Tightening Specifications: Refer to Fastener Tightening Specifications . Preliminary Procedures Loosen the upper trim pad enough to gain clearance to remove the cluster trim plate. Refer to Instrument Panel Upper Trim Pad Replacement . Remove the instrument panel center air outlet assembly. Refer to Air Outlet Replacement - Instrument Panel - Center . Remove the instrument panel left accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement - Left Side .
1	Instrument Panel Cluster Trim Plate Screws (Qty: 2) Tighten: 2 N.m (18 lb in)
2	Instrument Panel Cluster Trim Plate

Callout

Component Name

NOTE: Refer to Fastener Notice .

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

Loosen the upper trim pad enough to gain clearance to remove the cluster trim plate. Refer to Instrument Panel Upper Trim Pad Replacement .
Remove the instrument panel center air outlet assembly. Refer to Air Outlet Replacement - Instrument Panel - Center .
Remove the instrument panel left accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement - Left Side .

Instrument Panel Cluster Trim Plate Screws (Qty: 2)

Tighten: 2 N.m (18 lb in)

Instrument Panel Cluster Trim Plate