LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Engine Mechanical - 4.6L - 3 Of 4) >> Off-Vehicle Repair Instructions (2 Of 3) >> Camshaft Intermediate Drive Shaft Cleaning and Inspection >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Inspecting Camshaft Intermediate Drive Shaft
    GM613411Courtesy of GENERAL MOTORS CORP.
  1. Inspect the camshaft intermediate drive shaft for the following:
    • Worn or damaged hub-to-camshaft intermediate drive shaft sprocket bearing surface (1)
    • Cracks or damage to the camshaft intermediate drive shaft fastener holes (2)
    • Restrictions to the oil passage (3)
    • Damaged or stripped thread (4)
  2. Repair or replace the camshaft intermediate drive shaft as necessary.
scientia non olet · About LEMON Manuals