LEMON Manuals: Even more car manuals for everyone
Home >> Isuzu >> 2007 >> i-290 LS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Engine Mechanical - 4.6L - 1 Of 4) >> On-Vehicle Repair Instructions (1 Of 2) >> Camshaft Intermediate Drive Shaft Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the camshaft intermediate drive shaft sprocket. Refer to Primary Camshaft Drive Chain and Sprockets Replacement .
    2. Fig 1: Identifying Camshaft Intermediate Driveshaft
    GM207544Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: The camshaft intermediate drive shaft should not be removed unless wear is evident.
  2. Remove the camshaft intermediate drive shaft retaining bolts.
  3. Remove the camshaft intermediate drive shaft (1) from the engine.
  4. Clean and inspect the camshaft intermediate driveshaft. Refer to Camshaft Intermediate Drive Shaft Cleaning and Inspection .
scientia non olet · About LEMON Manuals