Front Bumper Impact Bar Replacement

WARNING: This page is about a different car, the 2007 Cadillac DTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Impact Bar Assembly - Front Bumper

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure Remove front fascia. Refer to Front Bumper Fascia Replacement .
1	Front Bumper Bar Bolts (Qty: 8) NOTE: Refer to FASTENER NOTICE Tighten: 10 N.m (89 lb in)
2	Front Bumper Bar Tip Remove push pin from front side radiator baffle.

Callout

Component Name

Preliminary Procedure

Remove front fascia. Refer to Front Bumper Fascia Replacement .

Front Bumper Bar Bolts (Qty: 8)

NOTE: Refer to FASTENER NOTICE

Tighten: 10 N.m (89 lb in)

Front Bumper Bar

Tip Remove push pin from front side radiator baffle.